Installing windows in a wooden house can be a challenging job. The reason for this is that wood is porous and needs to be treated accordingly before the windows can be fixed in place properly. To start with, you should make sure that all the loose debris has been removed from the window frames. The frame is the most exposed part of the window.
You should also clean the old screws well. Use a soft cloth to wipe the old grease off the screws. This will help to protect the screws from rusting. The next step is to get all the hardware removed. If there are any parts that cannot be used, they should be discarded so that they do not cause any damage later on.
You should ensure that the old window frame is free from any foreign objects. A good practice is to use a hammer firmly on the frame. Once the frame is free of foreign objects, you should clean it with a piece of cloth. The next step is to clean the surface thoroughly with a cloth. You need to take care to remove all dust or dirt from the surface.
Next, you should clean the exterior of the window carefully. You should use a soft cloth and wipe the surface clean. You should also sand the window with fine grit sandpaper in order to remove any scratches on the exterior. Once all the dirt is removed, you should use a dry and clean rag to gently wipe off the dust.
The next thing you need to do is to put in the glass panel into the frame. The panels should be kept level by using brackets. Once the panels are fitted, you should screw them into the frame firmly. After that, you should fill in the frame with the mortar.
If the panels are too small for your windows, you should use nails instead of the brackets. To finish the монтаж окон в деревянном доме, you should fill the frame with water. In this way, the walls of the house would be protected from damage caused by dampness.
If the old window frame has a few chips, you can cover them with cement before you install them. It is better to install the windows in the frames as soon as possible in order to avoid damage caused by the chip.
Once the installation is complete, you can use some new window film to give a shiny look to the house. You should cover all the windows with the film to give an overall look to the house. When the film is completely dried, you should replace the old window frame with the new one.
In order to keep the glass pane in the frame, you should use hinges on the inside of the window. These hinges should be placed on the frame in such a way that the glass pane is fixed securely. Once all the required steps have been followed, you can replace the screws on the exterior and fix the window properly.